Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Product Categories

Shoe Press Machine [41]
Shoe Shaping Machine [30]
Shoe Making Machine [23]
Hydraulic Machine Pump [74]
Hydraulic Safety Valve [132]
Rubber Making Machine [367]
Screen Printing Machine [95]
Silicone Products Making Machine [279]
Shoe Roughing Machine [36]
Label Hot Stamping Machine [45]
Foam Skiving Machine [45]
Silicone Rubber Material [22]
Automatic Heat Transfer Machine [225]
Hot Foil Stamping Machine [99]

Dongguan Fulund Intelligent Technology Co., Ltd.

Contact Now

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Name: Multicolor Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo
Brand: Fulund
Price: 1 USD

Brand Name : Fulund

Model Number : FLD-24C

Certification : CE

Place of Origin : CHINA

MOQ : 1

Price : USD

Payment Terms : T/T, Western Union, MoneyGram

Supply Ability : 100PCS/MONTH

Delivery Time : 7days

Packaging Details : WOODEN CASE

NAME : Dispensing Machine

Automatic grade : Full Automatic

Core Components : PLC, Pressure vessel, Other

Dimension(L*W*H) : 1250*1050*1560mm

Product Name : 24 color drop molding machine

Application : Production of PVC and silica gel products

Mould Life : 100k- 500k Shots

Voltage : 220V

Weight : 420

Power (kW) : 1.6

Surface treatment : Texture

Keyword : Plastic Injection Mold Molding Services

Keyword 1 : pvc logo automatic dispensing machine

Keyword 2 : soft pvc suitcase label making machine

Keyword 3 : the silicone machine

Contact Now

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Cheap Dispenser FAQ
Inconsistent glue size
When the glue is inconsistent, it is mainly caused by the instability of the pressure cylinder or the air pressure that stores the fluid.
The inlet pressure regulator should be set at 10 to 15psi. lower than the lowest pressure in the factory. The pressure used in the pressure cylinder should be above the pressure in the middle of the pressure regulator. Avoid using the low pressure part of the pressure gauge. .
The control pressure of the glue valve should be at least 60psi to ensure stable glue output.
Finally, check the glue time. If it is less than 15/1000 seconds, it will cause the glue to be unstable. The longer the glue time, the more stable the glue.
Flow is too slow
If the flow rate is too slow, change the tubing from 1/4” to 3/8”.
The pipeline should be as short as possible if not needed.
In addition to changing the tube, it is necessary to change the glue port and air pressure, which completely speeds up the flow rate.
air bubbles in fluid
Excessive fluid pressure combined with too short valve opening time may infiltrate air into the liquid. The solution is to reduce the fluid pressure and use a tapered beveled needle.

Application Rang: PVC/Silicon logo, Trademark for garment, footwear outsole/Strap/Vamp, Shoe welting, Cup pad, Silicon keyboard cover, Non-slip mat, Refrigerator Sticker, Disney soft toy, Silicon Key Chain, PVC Zipper puller etc....

Technical parameters:

Model No.	FLD-24C
Machine Size	125010501560mm
Weight	420KG
Electric Heating Power	1.6KW
Effective Trip	85048080mm
Worktable Size	890*460mm

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo

Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Dongguan Fulund Intelligent Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!